General Laboratory | Sterilizer

Autoclave / Sterilizer

autoclave

Main Specifications

  • Temp. up to 123℃
  • Accuracy < ± 0.5℃ at 121.0℃
  • Pressure up to 1.2kg-f/cm²
  • Digital PID control with pt-100 sensor
  • Fully automated sterilization cycle
  • Triple safety feature

Convenience & safety
Vertical loading with service basket

Digital PID controller precisely control set temp-erature within ±0.5℃ and sterilization time in min : sec

Dual LED displays present temperature and set temp ? erature or remaining time simultaneously.

Stainless Steel 304 (AISI304) interior, lid and top to protect from corrosion by water and steam

Incoloy heating element, provides long life, resistant to corrosion and high temperature in repeated use

Triple safety feature for over temperature and over – pressure

For sterilization of bacteria, microorganism and virus with steamed hot air usually at 121℃,1.2kgf/cm²

Sterilization for laboratory ware needs being sterilized before use such as flasks, bottles, pipets, animal cages, and plasticware, broth or agar media for bacterial culture or disposal of biohazard wastes such as syringe, cloth, gloves or Petri dishes.

autoclave:steam sterilizer

Autoclave / Steam Sterilizer

JSAT-Series Autoclave, Steam Sterilizer is an innovative replacement of conventional laboratory autoclave by providing reliable performance, up-to-dated design and safety door inter-lock system integrated with temperature and pressure for perfect user safety.

Specifications

Temp. Range Maximum 123 oC
Accuracy ± 0.5 oC at 121 oC
Uniformity ± 2.0 oC at 121 oC
Pressure up to 0.12 Mpa
Control Fully Automatic Sterilization Process
  Microprocessor PID Control
  Auto START / STOP Timer
Sensor Class A Pt-100 Ω Sensor
Safety Safety Door Lock
  Over-Temperature Cut-Off
  Over-Pressure Cut-Off
  Over Current Cut-Off
Material Body – Epoxy Powder Coated Steel
  Chamber – Stainless Steel 304
  Service Basket -Stainless steel 304 wire basket
Electric 220±10% VAC 50/60Hz 1-Phase
Plug config. CEE 7/7 Schuko or BS 1363 or 30 AMP

 

dry heat sterilizer

Dry Heat Sterilizer

Dry Heat Sterilizer is a common instrument to be used to drying, heating and sterilizing objects by heating air up to 160°C or 180°C with gravity or forced convection system during specified sterilizing exposure time range from 30 to 60 minutes of sterilization exposure time

Specifications

Heating JSOF-xxxS Forced Air Convection
  JSON-xxxS Gravity Air Convection
Temp. Range ambient + 10 oC ~ 250 oC
Accuracy ± 0.2 oC at 180 oC (JSOF-030S)
Uniformity ± 1.0 oC at 180 oC (JSOF-030S)
Control Microprocessor PID Control Auto START / STOP Timer
Sensor Class A Pt-100 Ω Sensor
Safety Over-Temperature Cut-Off
  Over Current Cut-Off
Material Body – Epoxy Powder Coated Steel
  Chamber – Stainless Steel 304
  Insulation – 50mm thick woven mineral wool
Standard accessory  Stainless steel wire shelf
 Optional accessory Perforated stainless steel shelf
Electric 220±10% VAC 50/60Hz 1-Phase
Plug config. CEE 7/7 Schuko or BS 1363

 

 


If interested in this product, contact us here.

Copyright ® 2019 Aspen System. All rights reserved.